ImageImage

OT: DIY

Moderators: MickeyDavis, paulpressey25

User avatar
buckboy
RealGM
Posts: 13,175
And1: 8,556
Joined: Nov 05, 2004
Location: At the Gettin' Place
     

Re: OT: DIY 

Post#101 » by buckboy » Sun Mar 5, 2017 10:41 pm

M-C-G wrote:
Gianstoppable wrote:
buckboy wrote:
You don't need a permit. I mean they may tell you do, but you don't. Permits are for suckers. I've done $150,000 worth of work on my house and never pulled a permit. And that's just at this house.


I live 2 houses from Town Hall, had the inspector stop by when we originally started our remodel so we had to pull permits for everything. They shouldn't be able to see this area so I won't pull one anyway


So we added a bathroom without permit and it came up as an issue when we sold with buyers. But if you aren't planning on moving it is a good way not to get on their radar for a new property tax assessment


Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.
"This is my home, this is my city...I'm blessed to be a part of the Milwaukee Bucks for the next 5 years. Let's make these years count. The show goes on, let's get it."
User avatar
Pachinko_
RealGM
Posts: 20,693
And1: 23,985
Joined: Jun 13, 2016
 

Re: OT: DIY 

Post#102 » by Pachinko_ » Mon Mar 6, 2017 12:24 am

buckboy wrote:
M-C-G wrote:
Gianstoppable wrote:
I live 2 houses from Town Hall, had the inspector stop by when we originally started our remodel so we had to pull permits for everything. They shouldn't be able to see this area so I won't pull one anyway


So we added a bathroom without permit and it came up as an issue when we sold with buyers. But if you aren't planning on moving it is a good way not to get on their radar for a new property tax assessment


Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.

so when we bought our house I asked both the RE agent and the legal guy (conveyancer?) if either of them had checked if the shed and carport had permits, and they both said no. So it was really up to us to check, which we didn't because we don't really care and we don't intend to sell (at least not before the shed would need to be upgraded anyway).
User avatar
Gianstoppable
Lead Assistant
Posts: 4,587
And1: 1,750
Joined: Jan 07, 2015
     

Re: OT: DIY 

Post#103 » by Gianstoppable » Mon Mar 6, 2017 12:57 am

buckboy wrote:
M-C-G wrote:
Gianstoppable wrote:
I live 2 houses from Town Hall, had the inspector stop by when we originally started our remodel so we had to pull permits for everything. They shouldn't be able to see this area so I won't pull one anyway


So we added a bathroom without permit and it came up as an issue when we sold with buyers. But if you aren't planning on moving it is a good way not to get on their radar for a new property tax assessment


Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.


Permits are extremely cheap (roughly $180) if you consider the amount of money ($30,000) we spent on the remodel, plus then you know everything is up to code and better if there was ever an insurance claim. I know someone who didn't pull a permit for work they did on their home and they had an electrical fire and the insurance company is running them around because they never pulled a permit and had possible bad wiring. Better safe than sorry for me, especially since we already had an inspector stop by. If we werent on main street and weren't doing such a big remodel we wouldn't have pulled one but it's kind of obvious when you have 2 30 yard dumpsters outside lol
#FreeChuckDiesel
User avatar
buckboy
RealGM
Posts: 13,175
And1: 8,556
Joined: Nov 05, 2004
Location: At the Gettin' Place
     

Re: OT: DIY 

Post#104 » by buckboy » Mon Mar 6, 2017 1:00 am

Yeah it's a personal choice. I hear ya.
"This is my home, this is my city...I'm blessed to be a part of the Milwaukee Bucks for the next 5 years. Let's make these years count. The show goes on, let's get it."
User avatar
Gianstoppable
Lead Assistant
Posts: 4,587
And1: 1,750
Joined: Jan 07, 2015
     

Re: OT: DIY 

Post#105 » by Gianstoppable » Mon Mar 6, 2017 1:01 am

buckboy wrote:
M-C-G wrote:
Gianstoppable wrote:
I live 2 houses from Town Hall, had the inspector stop by when we originally started our remodel so we had to pull permits for everything. They shouldn't be able to see this area so I won't pull one anyway


So we added a bathroom without permit and it came up as an issue when we sold with buyers. But if you aren't planning on moving it is a good way not to get on their radar for a new property tax assessment


Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.


Actually the worst thing that can happen is if they don't like what you did like sat put up a shed, they COULD make you take it back down. I've heard plenty of stories about that with **** inspectors. For the work I do were supposed to pull permits but we never do lol
#FreeChuckDiesel
User avatar
Gianstoppable
Lead Assistant
Posts: 4,587
And1: 1,750
Joined: Jan 07, 2015
     

Re: OT: DIY 

Post#106 » by Gianstoppable » Mon Mar 6, 2017 1:04 am

Also, pulling a permit may cost you more originally in taxes and permit fees but you have proof that you spent that amount on your home and it will help reduce your capital gains tax when you sell
#FreeChuckDiesel
User avatar
M-C-G
RealGM
Posts: 23,523
And1: 9,849
Joined: Jan 13, 2013
     

Re: OT: DIY 

Post#107 » by M-C-G » Mon Mar 6, 2017 9:08 pm

Pachinko_ wrote:Ι still need to make some flashings for the windows, otherwise I'm basically done.
In the last minute I opted for a flat roof and now the thing looks something between a shipping container and a sardine can :D

Image



This looks great. Definitely has that repurposed shipping container look to it. I dig it.
User avatar
M-C-G
RealGM
Posts: 23,523
And1: 9,849
Joined: Jan 13, 2013
     

Re: OT: DIY 

Post#108 » by M-C-G » Mon Mar 6, 2017 9:10 pm

AussieBuck wrote:Getting there, at least for the shell, need to build a door and window shutters etc.

Image



You've got a treehouse growing out of a your tree. Looks great, love the slide built right into it. Nice touch.
jute2003
Lead Assistant
Posts: 5,191
And1: 2,571
Joined: Feb 20, 2013
     

Re: OT: DIY 

Post#109 » by jute2003 » Mon Mar 6, 2017 9:19 pm

Gianstoppable wrote:
buckboy wrote:
M-C-G wrote:
So we added a bathroom without permit and it came up as an issue when we sold with buyers. But if you aren't planning on moving it is a good way not to get on their radar for a new property tax assessment


Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.


Permits are extremely cheap (roughly $180) if you consider the amount of money ($30,000) we spent on the remodel, plus then you know everything is up to code and better if there was ever an insurance claim. I know someone who didn't pull a permit for work they did on their home and they had an electrical fire and the insurance company is running them around because they never pulled a permit and had possible bad wiring. Better safe than sorry for me, especially since we already had an inspector stop by. If we werent on main street and weren't doing such a big remodel we wouldn't have pulled one but it's kind of obvious when you have 2 30 yard dumpsters outside lol


I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.
only a fan, only an opinion
User avatar
M-C-G
RealGM
Posts: 23,523
And1: 9,849
Joined: Jan 13, 2013
     

Re: OT: DIY 

Post#110 » by M-C-G » Mon Mar 6, 2017 9:23 pm

jute2003 wrote:
Gianstoppable wrote:
buckboy wrote:
Yeah that's the worst thing that can happen. Then you pay to have it inspected. Cheaper than the permit and it has never come up for me in 4 houses.


Permits are extremely cheap (roughly $180) if you consider the amount of money ($30,000) we spent on the remodel, plus then you know everything is up to code and better if there was ever an insurance claim. I know someone who didn't pull a permit for work they did on their home and they had an electrical fire and the insurance company is running them around because they never pulled a permit and had possible bad wiring. Better safe than sorry for me, especially since we already had an inspector stop by. If we werent on main street and weren't doing such a big remodel we wouldn't have pulled one but it's kind of obvious when you have 2 30 yard dumpsters outside lol


I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.


Or in my case there was an electrical inspector that must just drive around the town looking for any type of work van or truck that could be doing work on a house. Threatened to put a lien on the house and potentially bust up concrete to inspect the work.
jute2003
Lead Assistant
Posts: 5,191
And1: 2,571
Joined: Feb 20, 2013
     

Re: OT: DIY 

Post#111 » by jute2003 » Mon Mar 6, 2017 9:42 pm

M-C-G wrote:
jute2003 wrote:
Gianstoppable wrote:
Permits are extremely cheap (roughly $180) if you consider the amount of money ($30,000) we spent on the remodel, plus then you know everything is up to code and better if there was ever an insurance claim. I know someone who didn't pull a permit for work they did on their home and they had an electrical fire and the insurance company is running them around because they never pulled a permit and had possible bad wiring. Better safe than sorry for me, especially since we already had an inspector stop by. If we werent on main street and weren't doing such a big remodel we wouldn't have pulled one but it's kind of obvious when you have 2 30 yard dumpsters outside lol


I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.


Or in my case there was an electrical inspector that must just drive around the town looking for any type of work van or truck that could be doing work on a house. Threatened to put a lien on the house and potentially bust up concrete to inspect the work.



That's money out of his pocket. :-)
only a fan, only an opinion
User avatar
buckboy
RealGM
Posts: 13,175
And1: 8,556
Joined: Nov 05, 2004
Location: At the Gettin' Place
     

Re: OT: DIY 

Post#112 » by buckboy » Mon Mar 6, 2017 9:46 pm

M-C-G wrote:
jute2003 wrote:
Gianstoppable wrote:
Permits are extremely cheap (roughly $180) if you consider the amount of money ($30,000) we spent on the remodel, plus then you know everything is up to code and better if there was ever an insurance claim. I know someone who didn't pull a permit for work they did on their home and they had an electrical fire and the insurance company is running them around because they never pulled a permit and had possible bad wiring. Better safe than sorry for me, especially since we already had an inspector stop by. If we werent on main street and weren't doing such a big remodel we wouldn't have pulled one but it's kind of obvious when you have 2 30 yard dumpsters outside lol


I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.


Or in my case there was an electrical inspector that must just drive around the town looking for any type of work van or truck that could be doing work on a house. Threatened to put a lien on the house and potentially bust up concrete to inspect the work.


Yeah, it depends on where you live. If you have one of those douchebags around I suppose you have to pull the permits.
"This is my home, this is my city...I'm blessed to be a part of the Milwaukee Bucks for the next 5 years. Let's make these years count. The show goes on, let's get it."
User avatar
M-C-G
RealGM
Posts: 23,523
And1: 9,849
Joined: Jan 13, 2013
     

Re: OT: DIY 

Post#113 » by M-C-G » Mon Mar 6, 2017 9:47 pm

buckboy wrote:
M-C-G wrote:
jute2003 wrote:
I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.


Or in my case there was an electrical inspector that must just drive around the town looking for any type of work van or truck that could be doing work on a house. Threatened to put a lien on the house and potentially bust up concrete to inspect the work.


Yeah, it depends on where you live. If you have one of those douchebags around I suppose you have to pull the permits.


Yeah, I am moving out of the city and think there is probably a lot less risk of anyone caring going forward.
jute2003
Lead Assistant
Posts: 5,191
And1: 2,571
Joined: Feb 20, 2013
     

Re: OT: DIY 

Post#114 » by jute2003 » Mon Mar 6, 2017 9:48 pm

jute2003 wrote:
M-C-G wrote:
jute2003 wrote:
I feel like the necessity of a permit for a lot of things that would normally require one comes down to how nosy your neighbors are and if you have an old lady with nothing better to do with her time that lives within a couple blocks of your house.


Or in my case there was an electrical inspector that must just drive around the town looking for any type of work van or truck that could be doing work on a house. Threatened to put a lien on the house and potentially bust up concrete to inspect the work.



That's money out of his pocket. :-)



I'll also say that there are some things that I will go about the "right" way. I am not particularly comfortable with electrical so I will hire it out and have it inspected thus making it necessary to have the proper permits.
only a fan, only an opinion
User avatar
stellation
RealGM
Posts: 16,026
And1: 9,530
Joined: Dec 13, 2005
Location: *inaudible*

Re: OT: DIY 

Post#115 » by stellation » Fri Apr 21, 2017 8:58 am

Hey kiddos. I'm going to retile a shower floor tomorrow, I'm relatively down with what I need to do to stick the tiles/grout etc. but a quick (probably dumb!) question- is there something I should be using where the floor and wall tiles meet? I'm just going to be tiling the floor, I'm guessing it maybe isn't standard grout in those corners?
#FreeChuckDiesel
User avatar
AussieBuck
RealGM
Posts: 42,332
And1: 20,840
Joined: May 10, 2006
Location: Bucks in 7?
 

Re: OT: DIY 

Post#116 » by AussieBuck » Fri Apr 21, 2017 12:22 pm

stellation wrote:Hey kiddos. I'm going to retile a shower floor tomorrow, I'm relatively down with what I need to do to stick the tiles/grout etc. but a quick (probably dumb!) question- is there something I should be using where the floor and wall tiles meet? I'm just going to be tiling the floor, I'm guessing it maybe isn't standard grout in those corners?

Hold on there buddy, do you have some kind of waterproofing membrane there? What kind of materials are we talking about? If everything is otherwise cool in most cases you would have silicon that colour matches the grout where the wall tiles meet the floor tiles.
emunney wrote:
We need a man shaped like a chicken nugget with the shot selection of a 21st birthday party.


GHOSTofSIKMA wrote:
if you combined jabari parker, royal ivey, a shrimp and a ball sack youd have javon carter
User avatar
stellation
RealGM
Posts: 16,026
And1: 9,530
Joined: Dec 13, 2005
Location: *inaudible*

Re: OT: DIY 

Post#117 » by stellation » Fri Apr 21, 2017 9:00 pm

AussieBuck wrote:
stellation wrote:Hey kiddos. I'm going to retile a shower floor tomorrow, I'm relatively down with what I need to do to stick the tiles/grout etc. but a quick (probably dumb!) question- is there something I should be using where the floor and wall tiles meet? I'm just going to be tiling the floor, I'm guessing it maybe isn't standard grout in those corners?

Hold on there buddy, do you have some kind of waterproofing membrane there? What kind of materials are we talking about? If everything is otherwise cool in most cases you would have silicon that colour matches the grout where the wall tiles meet the floor tiles.

I'm pretty content the existing waterproofing has held- looks to be no problems under/on adjoining walls. It's just the tiles, but I want to have a crack at replacing them- I mainly just want the experience to work out how much to do myself in the future. It's only going to be a temporary job, we're currently weighing up whether to build a new house or renovate our existing one (we have a fair bit of land so can pretty easily pop it in) and if we go with renovating the existing one the bathroom will be the first to get done (so some time in the next 12 months).

I have the tile adhesive and tiles already (just going with small ones), just need to grab some grout. I'm weighing up whether to use a primer or not (like this).
#FreeChuckDiesel
User avatar
buckboy
RealGM
Posts: 13,175
And1: 8,556
Joined: Nov 05, 2004
Location: At the Gettin' Place
     

Re: OT: DIY 

Post#118 » by buckboy » Fri Apr 21, 2017 9:23 pm

Anything silicone based should work nicely. It'll be very easy to work with too.
"This is my home, this is my city...I'm blessed to be a part of the Milwaukee Bucks for the next 5 years. Let's make these years count. The show goes on, let's get it."
User avatar
AussieBuck
RealGM
Posts: 42,332
And1: 20,840
Joined: May 10, 2006
Location: Bucks in 7?
 

Re: OT: DIY 

Post#119 » by AussieBuck » Fri Apr 21, 2017 11:19 pm

stellation wrote:
AussieBuck wrote:
stellation wrote:Hey kiddos. I'm going to retile a shower floor tomorrow, I'm relatively down with what I need to do to stick the tiles/grout etc. but a quick (probably dumb!) question- is there something I should be using where the floor and wall tiles meet? I'm just going to be tiling the floor, I'm guessing it maybe isn't standard grout in those corners?

Hold on there buddy, do you have some kind of waterproofing membrane there? What kind of materials are we talking about? If everything is otherwise cool in most cases you would have silicon that colour matches the grout where the wall tiles meet the floor tiles.

I'm pretty content the existing waterproofing has held- looks to be no problems under/on adjoining walls. It's just the tiles, but I want to have a crack at replacing them- I mainly just want the experience to work out how much to do myself in the future. It's only going to be a temporary job, we're currently weighing up whether to build a new house or renovate our existing one (we have a fair bit of land so can pretty easily pop it in) and if we go with renovating the existing one the bathroom will be the first to get done (so some time in the next 12 months).

I have the tile adhesive and tiles already (just going with small ones), just need to grab some grout. I'm weighing up whether to use a primer or not (like this).

Ok cool, just make sure you use silicon instead of grout for the joint where the wall tiles meet the floor.
emunney wrote:
We need a man shaped like a chicken nugget with the shot selection of a 21st birthday party.


GHOSTofSIKMA wrote:
if you combined jabari parker, royal ivey, a shrimp and a ball sack youd have javon carter
User avatar
Finn
Starter
Posts: 2,355
And1: 2,599
Joined: Aug 14, 2009
       

Re: OT: DIY 

Post#120 » by Finn » Thu May 4, 2017 3:48 pm

Forget about this thread when I made this post in the OT thread:

Anybody have any experience with rear engine riding lawnmowers? Sears, Cub Cadet, Snapper, Murray are brands I'm aware of but they all look virtually identical. Many come with an MTD engine which according to the reviews is bullet-proof. More expensive models have a Briggs & Stratton. Sears is "shift on the go" & won't mow in reverse. Murray is crap (I assume). Cub Cadet & Snapper have 2 models - 1 like the Sears unit, another with hydrostatic drive that'll mow in reverse. Prices seem to range from $1000 to $1600or $1700.

Sears Mower

Return to Milwaukee Bucks